Identification de la relation de dispersion dans les barresIdentification of the dispersion relation in rods

Dispersion and attenuation of longitudinal waves in elastic or weakly viscoelastic rods are measured by analysing the resonant frequencies present in the strain spectrum due to an unknown loading. The method takes the finite measuring time of the test into account. It is applied to an aluminium bar, in which the dispersion relation is identified very accurately at frequencies up to 60 kHz. To cite this article: R. Othman et al., C. R. Mecanique 330 (2002) 849–855.     

Linear elastico-viscous properties of molten standard polystyrenes

This paper contains an extensive presentation of dynamic mechanical data (complex moduli), as obtained on the melts of a series of standard polystyrenes of narrow molar mass distributions. It also shows the way of obtaining structural parameters (plateau modulus and friction factor) which are needed for an interpretation of these data in terms of simple theoretical models (Maxwell elements, Doi-Edwards model). A linear mixing rule is used for taking into account the finite width of the molar mass distributions.Dedicated to Prof. F. R. Schwarzl on the occasion of his 60th birthday     

On the damping function of shear relaxation modulus for entangled polymers

Published data of the damping function of the shear relaxation modulus, h(), are reviewed. This is the ratio of the relaxation modulus measured at a finite magnitude of shear, , to that at the limit of = 0. Majority of the data are in accord with the universal function of the Doi-Edwards tube model theory, in which the damping or the decrease of h() is attributed to the contraction along the tube of extended polymer chains. The weaker damping seems to be attributed to 1) comb-branching such as in LDPE; 2) lack of entanglement in too short chains; 3) bimodal molecular weight distribution. However, a star-branching does not cause a deviation from the tube model theory and a broadness of molecular weight distribution is not a major origin of a weaker damping. A star-branched polystyrene with 15 arms exhibits no strain dependence: h() = 1. For highly entangled systems with more than 50 entanglement points per molecule, the strain dependence is stronger than that of the Doi-Edwards theory. This could be due to a slip or an instability of deformation in the material.     

孪晶对多晶纯钛塑性变形影响的实验研究

本文介绍了不同温度下多晶纯钛试件的单调拉伸、压缩试验和不同应变的压缩加卸载试验及其结果,同时介绍了拉断试样以及不同压缩应变下卸载试样的金相观察结果。通过直接比较不同温度下多晶纯钛的单调拉伸、压缩试验结果以及相应的金相分析,得到了由孪晶单独引起的流动应力的增加与应变之间的定量关系。本文还根据Hall-Petch关系和孪晶体积分数的演化方程,建立了孪晶引起的流动应力的增加与应变之间的唯象解析关系。试验结果表明此唯象关系较好地描述了孪晶对多晶纯钛塑性变形的影响。     

聚氨酯泡沫塑料压缩杨氏模量的理论预测

通过微分法导出了泡沫塑料剪切模量和体积模量所满足的微分方程组，再利用联系泡沫塑料泊松比和孔隙比的Ｋｅｒｎｅｒ－Ｒｕｓｃｈ经验关系及泡沫塑料弹性常数间满足足的关系，在基体材料不可压缩的假设下，确定了泡沫塑料的杨氏模量。本文针对几种密度的泡沫塑料，分别对它们的杨氏模量进行了理论预测和实验测定，结果表明：理论预测的模量在较高密度下与实验符合的很好，在低密度下也给出相当好的近似值。此外，本文的结果同其他理     

弹塑性有限变形的拟流动理论

本文提出一种弹塑性有限变形的拟流动理论。该理论从正交性法则出发，通过引入“拟弹性模量”和模量衰减函数并改进应变率的弹塑性分解，实现了由有限变形Ｐｒａｎｄｔｌ－Ｒｅｕｓｓ流动理论（Ｊ２Ｆ）向基于非正交法则的率形式形变理论（Ｊ２Ｄ）的合理的光滑过渡；并适用于初始及后继各向异性变形分析。在特殊条件下，可退化为Ｊ２Ｆ、Ｊ２Ｄ理论以及由任意各向异性屈服函数描述的流动理论。将该理论用于韧性金属平面应力／应变拉伸失稳与变形局部化的有限元模拟，并与理论分析及实验结果相比较，表明了本文理论的正确性。     

大理岩动态拉伸强度及弹性模量的SHPB实验研究

提出了获取脆性材料动态拉伸强度及弹性模量的实验步骤及相关记录数据的分析方法。利用直径为100mm的分离式Hopkinson压杆径向冲击巴西圆盘和平台巴西圆盘试样,测试了大理岩在高应变率加载下的动态力学性能。应力波加载下动态劈裂拉伸圆盘在试样中心产生了约45/s的拉伸应变率。分析了实验的有效性并考虑了试样两个端面应力波波形差异的影响以提高实验结果的精度。结果表明准静态下的公式可适用于动态劈裂拉伸实验;大理岩的动态拉伸强度及弹性模量比静态时有明显的增加。     

On physical criteria for the selection of wood for soundboards of musical instruments

In order to develop criteria for the physical evaluation of wood for soundboards of musical instruments, measurements were made of dynamic Young's modulusE, static Young's modulusE, internal frictionQ ^–1 in longitudinal direction, and specific gravity for numerous species of broad-leaved wood. From the results obtained, including those of our previous paper on coniferous wood [1], it was found that the suitability of wood for soundboards could be evaluated by the quantity ofQ ^–1/(E/), and that there were very high correlations betweenQ ^–1/(E/) andE/, and betweenE andE, regardless of wood species. Consequently, it becomes possible to select practically any wood suitable for soundboards by using the value ofE/, which can be measured easily, and it was derived that the relation betweenE/ andQ ^–1 of wood could be expressed by an exponential equation regardless of wood species.     

Oscillatory measurements of silicone oils —Loss and storage modulus master curves

The work describes a way to obtain loss modulus and storage modulus master curves from oscillatory measurements of silicone oils.The loss modulus master curve represents the dependence of the viscous flow behavior on · ₀ ^* and the storage modulus master curve — the dependence of the elastic flow behavior on · ₀ ^* .The relation between the values of the loss modulus and storage modulus master curves (at a certain frequency) is a measurement of the viscoelastic behavior of a system. The G/G-ratio depends on · ₀ ^* which leads to a viscoelastic master curve. The viscoelastic master curve represents the relation between the elastic and viscous oscillatory flow behavior.     

多胞材料的力学行为

多胞材料具有独特的力学性质,其工程应用日益增加.人造多胞材料可以分为蜂窝材料和泡沫材料两类.本文介绍了这两类材料在不同载荷条件下力学行为的研究概况.对于某些天然材料(木材和松质骨)的多胞结构及其模型也作了简要介绍.